Skip to end of metadata
Go to start of metadata

Cross section of the LipSync showing the internals, include the circuit boardCross section of the LipSync showing the internals, include the circuit board


LipSync

  • Bluetooth option coming
  • no iOS support yet - requires a driver

Hardware parts

  • controlled by analog joystick
  • adjustable sensitivity using buttons on back
  • mouthpiece w filter attached to pressure sensor
  • puff - click
  • double-puff - double click
  • puff and hold - drag
  • sip - right-click
  • can be customized

If you have a BT device on LipSync - it makes logistics harder as batteries can only be shipped via ground.

Casing is made with ABS 3d printing

Screw mount for mounting.

  • affordability and durability is important.

built by volunteers normally.

Ideas:

  • can we have an event to make these?

Questions:

  • takes about 3 hours to build for people who have never done it.

Mounting is an issue:

  • very difficult to mount on a wheelchair as there is limited space for such devices (may already have phone etc.)

Bluetooth: getting the right adapter is tricky - needs to work with broad devices.

Government funding

  • ADP - 75% funded, 100% if on social support.
  • There are some requirements
    • equipment evaluation process - submitted to gov., clinicians evaluate
    • usually DIY solutions are not included in ADP funded list.

Striking a balance between a medical assistive device and the maker enthusiasm

Is there an advocacy direction for DIY AT solutions?

Shipping Lithium batteries is a challenge

  • trying to ship everything inside the unit
  • using splitter cable to power via battery pack.

Maintainability everything is easily repaired - can be diagnosed based on the build manual.

  • Would like to build up a network to help distribute and maintain


Tetra Society - not enough volunteers, hoping to energize volunteerism from the maker movement

A number of casings were made.

  • Adapted from a previous device casing
  • boards luckily fit inside
  • hardest part was the direction sensor
    • Finding the right sensor was hard - the Wii analog sensor was great but had too much throw.

Bacteria is a concern - hygiene.

How would you need to use it with a respirator.

Haptic feedback isn't quite there

  • audible
  • led for status

Framework for feedback

  • there are reports through the group
  • diversify involvement - from practictioners, caregivers, etc.
  • No labels