Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

gphoto2

  • support for gphoto2 v2.4.7 and libgphoto2 v2.4.8. Other versions are untested.

Cameras

  • tested using Canon PowerShot G10, Nikon D50, and Nikon D200
  • For Nikon DLSRs, needed to be put in PTP USB mode to work with gphoto2
  • remove memory cards from cameras before using Decapod for best results. Otherwise Ubuntu may try to mount the memory card file system and lock out Decapod.
  • Set cameras to capture in JPG. Other capture formats not supported or tested.
  • Recommend using identical pair of cameras for capturing with identical settings.

Decapod UI

  • drag and drop works
  • when selecting an item to drag, the initial drag style is not correct.
  • Delete is not always work and may lock out the user from any further deletes. (FLUID 3521)
  • Help link does not do anything.
  • Finish & Export Buttons and Link are enabled by default (should be disabled until at least a pair of images added)
  • Placeholder outlines not properly aligned on some systems (i.e. FF 3 on Mac).
  • Preview image can get cropped at the bottom of the Preview region if the client's viewport isn't tall enough.

Post Capture Processing

  • Stitching and thumbnail processing executed immediately after capture.
  • Currently stitching assumes a Book Liberator configuration, and rotates left and right images accordingly.
    • This means that if images are captured in a different orientation, then the stitched image will be rotated incorrectly.
    • If left and right pages are out of order, then the rotation may end up wrong resulting in upside down pages.
  • If source images are different sizes, then stitching will top-align the images when stitching. This results in white space around the smaller image.
  • Stitching process will create a greyscale stitched image, but leaving the original files unmodified.

Future

  • Stitching should be run parallel and UI updated as stitching is done.(FLUID-3545)
  • No labels